1. Prepare the Fabric:

• Pre-press your fabric or garment for 5-10 seconds to remove moisture and wrinkles.
• Ensure the fabric is clean and flat.

2. Transfer the Design:

• Place the DTF film, design-side down, onto the fabric in the desired position.
• Cover the film with a parchment paper or a silicone sheet to protect it during the transfer process.
• Set your heat press to the recommended temperature (usually around 320°F/160°C) and time (15-20 seconds).
• Apply firm pressure during the transfer.

3. Peel the Film:

• Allow the garment to cool down to room temperature.
• Gently peel off the DTF film from the fabric. The design should now be transferred to the fabric.

4. Post-Press (Optional):

• For added durability, you can perform a post-press. Place a parchment paper or silicone sheet over the design and press again for 5-10 seconds.